Guangzhou Dongzhixu test equipment co. Ltd
+86 020-34905416
Announcement:

Products

contacts

Products

Home > Products

Walk-In environment test chamber

Update Time: 2015-05-08  Clicks:

步入式环境试验室.jpg

In the recent years, with its strong technique strength, Dongzhixu company has manufactured a mass of test laboratories for enterprises both at home and abroad. Those  laboratories include: Drive-In Test Chambers, Modular Walk-In Test Chambers, Welded Walk-In Test Chambers and so on, those chamber can do: High temperature test, low temperature test, constant temperature  and constant humidity test,Aging laboratory Ozone test, dust & sand test, Salty spray test, comprehensive environment test. All labora tories have a beautiful design and can be installed on site. Their technologic-al indexes and reliability of operation can reach to domestic advance level.

Drive-In Test Chambers

Drive-in environmental test chambers are ideal for full vehicle testing. Testing procedures include noise, vibration, climate conditions, suspension systems, shocks, squeaks and rattles. Every chamber can be taylor-designed to meet different requirements and specifications and can integrate with vibration systems for four post road simulation.

Modular Walk-In Test Chambers

This series of modular environmental test chambers is economical, flexible and easy to install.  Because of the modular design, these chambers can be reconfigured and expanded as needed. They are able to meet virtually any testing requirement and are often used for automotive testing, electronic testing, aerospace testing and material storage. Each chamber is equipped with a humidity water filtration system, electronic humidity sensors and a variety of customizable options.

Welded Walk-In Test Chambers

Welded walk-in environmental test chambers are designed for high temperature testing, typically for temperatures greater than 120oC. Ideal for rapid temperature change, combined environmental testing and altitude simulation, these chambers can be configured to any size.  Each chamber is equipped with a humidity water filtration system, electronic humidity sensors and a variety of customizable options.

Installation

Installation work at the customers’ location takes five days

Drive-in environmental test chambers for full vehicle testing.

  Dongzhixu provides drive-in chambers for full vehicle testing, designed and manufactured to meet your requirements.

These chambers are designed for testing noise, vibration and a variety of climate conditions. They may be used to test suspension systems, shocks, squeaks, rattles and more. Dongzhixu drive-in chambers also integrate with vibration systems for four post road simulation.

The Dongzhixu drive-in chamber is equipped with the new Touch Screen Controller designed to save chamber programming and setup time. The controller features a removable USB I-stick that simplifies access to profile, alarm, and audit trail files.

Options

  ■ Oversize/Additional Doors UV or IR Lighting Reinforced Floor Entry Ramp Vapor-Proof Lights Hydro Carbon/Carbon Monoxide Monitor Explosion Proof Electrical

Dongzhixu provides test chambers for combined environmental testing to simulate a variety
of road conditions and climates.

Temperature and/or Humidity Simulation Solar Simulation Vibration Simulation Altitude Simulation Wind Simulation Rain Simulation Sound Attenuation

Modular Walk-In Chambers for flexibility

DONGZHIXU’s  Modular Walk-In Test Chambers offer the most flexibility in designing interior work space. Pre-engineered regulating systems and prefabricated panels can be assembled to meet virtually any test or size requirement. DONGZHIXU uses modular regulating system for easy installation without taking up valuable workspace in your chamber.
Applications include, but are not limited to, automotive testing, electronic testing, telecommunication testing, aerospace testing, material storage, coating preparation, biomedical storage, research, or packaging materials evaluation. Each chamber is configured and fully tested at the factory to meet your requirements specifications.

Features & Benefits

Touch Screen Controller is designed to save. chamber programming and setup time. Removable USB I-stick simplifies access to profile, alarm, and audit trail files. 

RS-232/485 serial communications offer a selection of communications options.

Economical to meet the needs of your budget. 

Easy move-in and assembly. 

Ability to re-configure or expand to meet your needs.

Choice of interior and exterior finishes to meet your laboratory requirements.

Configurable to any size walk-in chamber or environmental room to fit your needs.

Humidity water filtration system is included to filter impurities and protect your chamber interior. 

An electronic humidity sensor is used on all humidity models for accuracy and minimal maintenance.

Easily accessible maintenance panels.

Options

Oversize/Additional Doors UV or IR Lighting Reinforced Floor Entry Ramp Vapor-Proof Lights Hydro Carbon/Carbon Monoxide Monitor Explosion Proof Electrical

Welded Walk-in Chamber for high temperature testing

DZX’s  Welded Walk-In chambers are ideal for applications that require high temperature testing over 120oC, high humidity, rapid temperature change rates, or combined environmental testing with altitude simulation. These chambers are constructed as one piece and are welded to form a hermetically sealed unit around a structural steel frame. DZX welded walk-in chambers are also used for other custom applications.
Wind, rain, solar, acoustic or vibration systems can also be added to your walk-in chamber to simulate different environments. Each chamber is configured and fully tested at the factory to meet your test specifications.

Features & Benefits

Touch Screen Controller is designed to save chamber programming and setup time. Removable USB I-stick simplifies access to profile, alarm, and audit trail files.

 RS-232/485 serial communications offer a selection of communications options. 

Extended temperature ranges for high temperature testing. 

Extended humidity ranges.

Fast temperature change rates available for high performance testing.

Allows for combined environmental testing such as altitude, vibration, wind, rain, etc.

Configurable to any size walk-in chamber or environmental room to fit your needs.

Durable chamber construction for dependability and longer life.

Humidity water filtration system is included to filter impurities and protect your chamber interior.

An electronic humidity sensor is used on all humidity models for accuracy and minimal maintenance.

Easily accessible maintenance panels.

A variety of climatic conditions may be simulated for combined environmental testing

Temperature and/or Humidity Simulation Solar Simulation  Vibration Simulation Altitude Simulation Wind Simulation Rain Simulation Sound Attenuation

Options

Oversize/Additional Doors UV or IR Lighting   Reinforced Floor Entry Ramp Vapor-Proof Lights Hydro Carbon/Carbon Monoxide Monitor Explosion Proof Electrical

 

Copyright © Guangzhou Dongzhixu test equipment co. Ltd All Rights Reserved.